How to configure your Custom Amenities on Open Active


In this guide, we will show you where to find the Default standard amenities and how to create new ones for your specific facilities.

For example, some of the standard ones would be Creche, Lockers, etc..

A custom one could be a Lift, a Ramp Access...


Step by Step 

1. From the home page, go to the Facilities Module


2. Go to Amenities



3. Click on Create New Amenities on the bottom of the page


4. Add the name of the new amenity and click on Create


Your amenities will be divided between the Default ones on the top and the Custom ones you have created on the bottom.

Whilst you can edit and delete the latter, you can not amend the standard ones.



5. Enable Amenity on a Facility

A) From the Home Page, go to Facilities


B) Scroll down to the Manage Facilities Section on the bottom of the page.

Search for the Facility you wish to enable the amenities for (you can filter by Name or by status - published/unpublished) and click on Edit


C) Scroll down to the bottom and click on 'Open Active Tab'


D) Select Yes or No accordingly for each field and add the place type(s) (up to 3)


E) When happy with your selection, tick the confirmation box and click on Save Changes




Was this article helpful?
0 out of 0 found this helpful